| Product Parameters |
| | | | | | | | | | |
| Specification |
| Model: SGT | 4KVA | 6KVA | 7KVA | 8KVA | 10KVA | 15KVA | 20KVA | 25KVA |
| Rated Power | 3.2KW | 4.8KW | 5.6KW | 6.4KW | 8KW | 12KW | 16KW | 20KW |
| Battery Voltage | 48/96/192VDC | 96/192/384VDC |
| Specification |
| Model: SGT | 30KVA | 40KVA | 50KVA | 60KVA | 80KVA | 100KVA | 125KVA | 150KVA |
| Rated Power | 24KW | 32KW | 40KW | 48KW | 64KW | 80KW | 100KW | 120KW |
| Battery Voltage | 192/384VDC | 384VDC |
| Parameter |
| Input | AC Input Voltage Range | 380Vac/400Vac±10%(customized 190Vac/200Vac) |
| AC Input Frequency Range | 45Hz-65Hz |
| Phase | 3/N/PE |
| Output | Efficiency | ≥85% |
| Output Voltage(Battery Mode) | 380Vac/400Vac±10%(customized 190Vac/200Vac) |
| Output Frequency(Battery Mode) | 50/60Hz ±1% |
| Output Wave(Battery Mode) | Pure Sine wave |
| THD | liner load≤3% |
| AC Output Voltage Range | Conforming to AC input |
| AC Output Frequency Range | Conforming to AC input |
| Phase | 3/N/PE |
Inside Solar
Controller
(optional) | Charging Mode | MPPT or PWM |
| Charging Current | 12V/24V/48V System:10A,20A,30A,40A,50A,60A; 96V/192V/384V System:50A,100A,150A,200A |
| PV Input Voltage Range | 12V System:15V-44V;24V System:30V-44V;48V System:60V-88V;
96V System:120V-176V;192V System:240V-352V;384V System:480V-704V |
Max PV Input Voltage
(At 25°C) | 12V/24V System:50V;48V System:100V;96V System:200V;192V System:400V;384V System:750V |
| PV Array Maximum Power | 12V System:140W,280W,420W,560W,700W,840W;24V System:280W,360W,840W,1120W,1400W,1680W;
48V System:560W,1120W,1680W,1120W,2240W,3360W;96V System:5.6KW,11.2KW,8.4KW*2,11.2KW*2
192V System:11.2KW,22.4KW,16.8KW*2,22.4KW*2;384V System:22.4KW,44.8KW,33.6KW*2,44.8KW*2 |
| Battery | DC input voltage range | 10.5-17V DC/Single battery |
| Battery low voltage alarm | 11V/Single battery |
| Battery low voltage protection | 10.5V DC/Single battery |
| Battery high voltage alarm | 15V/Single battery |
| Battery high voltage protection | 17VDC/Single battery |
| Battery Type | U0: Gel U.S.A / U1: A.G.M.1 /U2: A.G.M.2 / U3: Sealed lead Acid / U4: Gel European /
U5: Open lead Acid / U6: Calcuim(open) / U7: Sulphation cycle |
| Working Mode | Battery First/AC First/Saving Energy Mode |
| AC Charging current(selectable) | 0~45A |
| Transfer Time | ≤4ms |
| Display | LCD |
| Thermal method | Forced air cooling |
| Protection | Over-load / Over-discharge / Short circuit / High and low temperayure |
| Communication | RS232/RS485/APP/SNMP/GSM (Optional) |
| Environment | Temperature | -10ºC~40ºC |
| Height | 2000m(Less load when height over) |
| Noise | ≤65dB |
| Humidity | 0%~95%(No condense) |
| Note:All specifications are subject to charge without prior notice |
